Suitable for industrial and medical applications, 400 series martensitic
steel is much more corrosion-resistant than carbon steel and can be
sharpened to equally-keen edge sharpness. Specialty Blades maintains
an extensive inventory of Razor Blade Stainless steel in thicknesses
from .010”-.062” thick, as well as 420 “Cutlery Grade” Stainless
steel.
| AUSTENITIC STAINLESS STEELS |
| STEEL TYPE |
301 SS EXTRA HIGH YIELD |
17-4 PH CONDITION H 900 |
17-7 PH CONDITION CH 900 |
17-7 PH CONDITION RH 950 |
| CHEMICAL ANALYSIS: (%) |
|
|
|
|
| CARBON (C) |
.15 MAX |
.07 MAX |
.09 MAX |
.09 MAX |
| MANGANESE (Mn) |
2.00 MAX |
1.00 MAX |
1.00 MAX |
1.00 MAX |
| SILICON (Si) |
1.00 MAX |
1.00 MAX |
1.00 MAX |
1.00 MAX |
| CHROMIUM (Cr) |
17.00 |
17.00 |
17.00 |
17.00 |
| TUNGSTEN (W) |
|
|
|
|
| VANADIUM (V) |
|
|
|
|
| COBALT (Co) |
|
|
|
|
| NICKEL (Ni) |
7.00 |
4.00 |
7.00 |
7.00 |
| MOLYBDENUM (Mo) |
|
|
|
|
| OTHER |
|
4.00 Cu |
.75/1.50 Al |
.75/1.50 Al |
| TYPICAL HARDNESS, Rc |
50 |
45 |
50 |
46 |
| WEAR RESISTANCE |
LOW |
LOW |
LOW - MOD |
LOW |
| WEAR INDEX ESTIMATE |
<1 |
1 |
1 |
1 |
| TOUGHNESS / SHOCK RESISTANCE |
HIGH |
HIGH |
HIGH |
HIGH |
| MATERIAL COST |
MOD |
MOD |
HIGH |
MOD |
| FABRICATION COST |
LOW - MOD |
MOD |
LOW - MOD |
MOD |
| AVAILABILITY |
LIMITED |
LTD - GOOD |
LTD - GOOD |
LTD - GOOD |
STOCKED THICKNESSES
(in inches) |
.015, .025 |
|
|
|
| THICKNESS RANGE |
<.030 |
.015 - .125+ |
.005 - .050 |
.008 - .125+ |
| CORROSION RESISTANCE |
EXCELLENT |
EXCELLENT |
EXCELLENT |
EXCELLENT |
Need more information? call 1-800-252-3371
Please Note: This data is provided at no charge for the intended
purpose of providing material application options to potential
blade users. It is offered subject to the usual disclaimer that
we have used
sources and estimates believed to be reliable in the development
of this information, but do not guarantee its accuracy in specific
applications. Please note that the chemical elements noted by % are
believed
to be
the major elements affecting performance. Other trace levels
of elements may be found depending on supplier and heat number. This
data
should
not be relied on in lieu of application-specific testing. Further,
if you see data in these charts that you do not believe is accurate,
we
would appreciate your calling us with that information at 800-252-3371.
|
