Those in the signmaking business know there are no better blades available than those we create at Specialty Blades. We manufacture blades to fit all the most popular equipment, from manufacturers such as Roland, Gerber, Allen Datagraph, Ioline, and many others. However, we do not limit our blade making to cutting equipment for these machines only. We can design and create the right blades no matter what type of equipment you possess. Choosing the right degree for your blade is important in achieving high-quality cutting results. A standard vinyl cutting blade is 45 degrees. Unfortunately, standard-degree blades are often unable to deliver quality cuts when thicker materials are involved. In fact, standard blades may actually become buried in very thick material. Lower degree blades may offer even less desirable performance. A higher degree blade, such as a 60-degree blade, may offer the right angle to cut through thicker materials completely, pivoting without impairment when tackling the job of cutting corners. The quality of the cut is even further influenced by the sharpness of the blade used and the down force. Call us at Specialty Blades to obtain further details about blades for vinyl cutting equipment. We will be happy to help you in selecting and obtaining the right blade for your task. Give us a call today at toll-free 1-800-252-3371 or send a fax to toll-free 1-800-742-7741. We also provide timely responses to e-mail messages sent to us at sales@specialtyblades.com.
|
